Product Detail
Commercial Floor-Standing Shelving Unit
Configure commercial floor-standing shelving around the stored items, environment, available footprint, tier spacing, shelf construction, load and restraint.
Overview
Product Overview
Full-height shelving organizes dry stores, preparation areas, walk-ins and back-of-house storage while keeping goods accessible and off the floor. Its height and multi-tier function distinguish it from low dunnage racks and wall shelves. Flat, wire/grid and perforated shelves, stainless or coated finishes, fixed or adjustable tiers and stationary or approved mobile bases remain configurations. Load ratings depend on material, span, bracing, assembly and test basis and are never transferred between systems.
Key Features
Key Features
Full-height multi-tier commercial storage
Flat, wire/grid or perforated shelf construction
Fixed or adjustable tier spacing by selected system
Stainless or coated finishes matched to the environment
Leveling feet or approved caster configurations
Optional wall or seismic restraint after site review
Construction-specific shelf and unit loads confirmed before release
Applications
Where This Product Is Used
Dry-store ingredient and smallwares storage
Preparation-room organization
Walk-in cooler or freezer storage after material review
Warewashing and wet-area storage with suitable finish
Commercial kitchens, hotels and central kitchens
Buyer Benefits
Why Buyers Choose This Type
Flat, grid/wire or perforated shelves
Four to six tiers or project-specific layouts
Stainless 304/316 or coated-wire systems
Fixed or tool-free adjustable shelves
Stationary leveling feet or approved casters
Alternative widths, depths and heights
Wall, seismic and floor-interface restraints
Technical Data
Specifications
Reference Configuration
A qualified planning envelope is about 600–1800 mm W × 350–600 mm D × 1500–2100 mm H with roughly 4–6 tiers. Official systems vary widely: selected wire shelves carry about 181–363 kg per shelf and selected six-tier units about 907 kg overall. Ratings apply only to the stated construction and distribution.
Configuration Options
Flat, grid/wire or perforated shelves; Four to six tiers or project-specific layouts; Stainless 304/316 or coated-wire systems; Fixed or tool-free adjustable shelves; Stationary leveling feet or approved casters; Alternative widths, depths and heights; Wall, seismic and floor-interface restraints
Reference Specifications
A qualified planning envelope is about 600–1800 mm W × 350–600 mm D × 1500–2100 mm H with roughly 4–6 tiers. Official systems vary widely: selected wire shelves carry about 181–363 kg per shelf and selected six-tier units about 907 kg overall. Ratings apply only to the stated construction and distribution.
| Reference configuration | Qualified reference example |
|---|---|
| Four-tier official wire-shelving envelope | 18/21/24 in widths; 24–72 in lengths; 63 or 74 in heights on the cited four-shelf system; shelves adjustable in 1 in increments. |
| Selected six-tier load reference | Selected six-tier unit lists 2,000 lb (907 kg) overall evenly distributed; EZ-ADD shelves 400 lb (181 kg) each. |
| Selected wire-shelf ratings | Selected shelves up to 48 in list 800 lb (363 kg) evenly distributed; 60 in shelves list 600 lb (272 kg); four-shelf unit maximum 2,000 lb (907 kg). |
Reference configurations are not fixed SourcePro promises. Final model, capacity, dimensions, power, utilities, safety, load basis and compliance are confirmed after inquiry and technical review.
Project Confirmation
What We Confirm for Your Project
Stored items and maximum load per shelf and per unit
Dry, wet, cold-room or freezer environment
Width, depth, height and aisle/door clearances
Tier count, shelf type and required spacing
Stainless grade or coated finish
Stationary or mobile arrangement
Wall/seismic restraint, floor condition, cleaning and destination compliance
Commercial Floor-Standing Shelving Unit FAQ
Which shelf type is best for a commercial kitchen?
Flat, wire/grid and perforated shelves suit different items, cleaning methods and environments. The stored product, spill risk, ventilation and sanitation plan guide selection.
Can the shelving be used in a walk-in cooler or freezer?
Yes, when the selected material and finish are approved for the temperature, moisture and cleaning conditions. Coating and corrosion resistance must be confirmed.
How many tiers should I choose?
Four to six tiers are common reference arrangements, but usable spacing, stored-item height, access and load often matter more than the nominal tier count.
Are the shelf load ratings universal?
No. Ratings depend on material, span, bracing, assembly and evenly distributed load. Only the selected system's certified load basis should be used.
Does tall shelving need restraint?
Wall, floor or seismic restraint may be required depending on height, load, casters, local rules and site risk. The final layout must be reviewed before installation.
Product Inquiry
Configure Your Shelving Unit
Share the stored items, maximum load, environment, available dimensions, shelf type, tier spacing, material, mobility and restraint needs. SourcePro will prepare a suitable reference configuration.
Configure Your Shelving UnitRelated Products
Related Storage Equipment
Storage Equipment
Commercial Dunnage Rack
Configure a commercial dunnage rack by stored item, footprint, height, material, platform, distributed and point load, feet and anchoring.
View Details
Storage Equipment
Commercial Mobile Ingredient Bin
Configure a mobile ingredient bin by ingredient, density, usable volume, safe load, material, lid, scoop storage, casters and clearance.
View Details
Storage Equipment
Commercial Sheet Pan Rack Trolley
Configure a sheet pan rack trolley by pan standard, tray count, rail spacing, side or end loading, temperature duty, cover and casters.
View Details